Product ID:SYSTEM THREE HARDENER 2
MSDS Date:05/01/1987
FSC:8030
NIIN:00N006564
Kit Part:Y
MSDS Number: BCNBS

Emergency Phone: 206-782-7976

Info Phone: 206-782-7976

Cage: OO286

Telephone: 206-782-7976

Cage: OO286

ETHYLENE AMINES

Fraction By Weight: <30%

AMIDO-AMINE BLEND

LD50 LC50 Mixture:LD50:(RATS) >1500 MG/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:LIQUID IS VERY IRRITATING TO SKIN &
EYES. MAY CAUSE MILD BURNS. PROLONGED OR REPEATED EXPOSURE MAY
PRODUCE SKIN SENSITIZATION & OTHER ALLERGIC RESPONSES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES:IMMEDIATE FLUSHING W/WATER FOR AT LEAST 30 MINS. GET
IMMEDIATE MEDICAL ATTENTION. SKIN:WIPE EXCESS OFF. WASH W/SOAP &
WATER OR WATERLESS HAND SOAP FOLLOWED BY SOAP & WATER. DO NOT USE
SOLVENTS. I NHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
ARTIFICIAL RESPIRATION/OXYGEN). CALL MD . INGEST:CALL MD
IMMEDIATELY .

Flash Point:>300F,>149C
Extinguishing Media:WATER, FOAM OR CARBON DIOXIDE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:TAKE UP W/ABSORBENT MATERIAL & DISPOSE OF
PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AWAY FROM OPEN FLAMES & HIGH
TEMPERATURES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:USE W/ADEQUATE VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORK GOG & FULL LNGTH FSHLD .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Vapor Density:HVR/AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
EPOXY RESINS UNDER UNCONTROLLED CONDITIONS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON DIOXIDE, CARBON MONOXIDE &
OXIDES OF NITROGEN.
Conditions to Avoid Polymerization:EPOXY RESINS IN UNCONTROLLED
SITUATIONS.

Waste Disposal Methods:APPROPRIATE DISPOSAL FACILITY IN COMPLIANCE
W/LOCAL REGULATIONS. DISPOSAL MUST BE IN ACCORDANCE W/FEDERAL,
STATE & LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.